Hobbywing 1/18 EZRun 18A Brushless ESC/Motor Combo (12.0T) w/ Program Box

Description

This is the Hobbywing EZRun 18A Sensorless Brushless ESC and Motor Combo, with an included Program Box. This combo combines an 18 Amp Brushless/Sensorless ESC with a 12.0 Turn, 5200kV Brushless/Sensorless Motor for an electronic package suitable for 1/18 and 1/16 scale on-road and off-road sport fun. 

Features:

• Compatible with sensorless brushless motors.
• High quality components, big current endurance.
• Excellent start-up, acceleration and linearity features.
• Plenty of programmable items, suitable for various of chassis’s, tires and racing tracks.
• Multiple protection features: Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection.
• Internal timing can be changed easily to make the ESC suitable for various of motors.
• Easily programmed with the SET button, LED Program Box, Multifunction LCD Program Box and USB Link Software.
• ESC firmware can be updated through the USB adapter in the LCD Program Box.
• Top quality motor:
• Aluminum shell (case)
• High quality magnets
• Copper wires of high temperature endurance
• Good quality bearings

ESC Specifications: Output: Continuous 18A, burst 50A. Input: 4-9 cells NiMH/NiCd or 2-3S LiPo. BEC: 6V/1A (Linear mode built-in BEC). Resistance: 0.01 Ohm. Motor Supported: Sensorless Brushless Motor. Suitable Motor:

• With 4-6 cells NiMH/NiCd or 2S Lipo: On-Road≥12T,  Off-Road≥8T;
• With 6-9 cells NiMH/NiCd or 3S Lipo: On-Road≥18T,  Off-Road≥24T;

Suitable Car: 1/18 on-road sport. Cooling Fan: Not included. Size: 31.5mm(L) * 27.5mm(W) * 15mm(H). Weight: 19g (Without wires)

Motor Specifications: kV: 5200 Motor Diameter: 20mm Motor Length: 30 Shaft Diameter: 2mm Shaft Length: 10mm Weight: 46g

Programmer Specifications: Size: 88x58x14mm Weight: 40g Input Weight: 4.8-6V

Includes:

• EZRun 18A Brushless/Sensorless ESC
• EZRun 2030 12.0T Brushless/Sensorless Motor
• LED Program Box 

Note: The battery lead coming off the ESC uses a Mini Tamiya male plug. You will either need a battery with a Mini Tamiya female plug, or solder on new connectors.